ABS Medical | Spectrum
Filament Spectrum Medical ABS is a highest-quality material designed specifically for medical applications. This 3D printing filament has been manufactured using ABS pellets that meet the biocompatibility requirements of USP Class VI or ISO 10993-1 certifications, which guarantees that it is biocompatible up to 30 days in contact with the human body (topical use).
Technical informations
Thermal properties | |
| Vicat softening temperature | 97 °C |
Filament properties | |
| Country of origin | Poland |
| Filament density | 1.06 g/mm3 |
Spool weight and dimensions |
How to store filaments
Humidity and UV light can decrease the filament quality and weaken its mechanical properties. We strongly recommend storing open filaments in a dry and dark place. You can find a complete guide on how to properly store your filament here
Where to throw print fails and supports?
We kindly ask our customers to cope with plastic waste responsibly. Failed prints, support material, rafts, or brims should be liquidated according to the local guidelines. Paradoxically, in most cases, it is better to throw this waste in the regular trash can, as most of the material waste created in 3D printing is not identified, which causes more problems than benefits in the waste sorting facilities.
ABS Medical | Spectrum
Filament Spectrum Medical ABS is a highest-quality material designed specifically for medical applications. This 3D printing filament has been manufactured using ABS pellets that meet the biocompatibility requirements of USP Class VI or ISO 10993-1 certifications, which guarantees that it is biocompatible up to 30 days in contact with the human body (topical use).
Additionally, Medical ABS filament is food contact approved according to EU No 10/20111 and 21 CFR FDA regulations.
Spectrum Group Sp. z o.o. guarantees that the base raw material has no additives and has not been modified in the filament production process.
General information about ABS :
ABS filaments were among the first, together with PLA, to enter the 3D printing material industry. As it was known for its good mechanical and thermal properties by the plastic industry, this material is not well suited for the 3D printing industry because of its bad printability. A popular use case of ABS was its ease of g postprocessing with acetone fumes. This dangerous and hazardous process can now be avoided by combining PolySmooth (PVB) filaments with isopropyl alcohol (and optionally the Polysher machine).
Printability of ABS filament
ABS is a hard-to-print material, and to be honest, there is almost always a better alternative to ABS. In the past years, PETG has been rapidly taking over ABS as it is much easier to print with and features similar mechanical properties. Printing ABS requires an enclosure, a strong adhesive, and a very hot hotbed (at least 100°C). ABS tends to warp a lot, and therefore we recommend printing only smaller parts. ABS cannot be cooled, as cooling drastically increase the warping effect and lower its interlayer adhesion, effectively lowering the printed parts' mechanical properties.
ABS mechanical and thermal properties
ABS has a typical thermal resistance of around 85°C and (if printed correctly) provides strong mechanical properties. Although, with the same printing gear and setting, much more advanced materials like PolyCarbonate or Nylon can be printed, which feature drastically better mechanical properties.
Tips and other notable benefits
Printing with ABS releases toxic and smelly ABS fumes. We don't recommend printing with ABS in a home environment. Printing with ABS filaments should be done in an air-filtered chamber or well-ventilated room.
Browse all ABS filaments in stock in our warehouse in Senec, Slovakia. For comparison, see also ASA and PC.
Spectrum is one of the largest filament manufacturers in Poland, with one of the broadest portfolios of 3D printing materials. It covers everything from easy desktop PLA to engineering polymers and fibre-reinforced composites. JustCreate3D stocks over 30 Spectrum products in its warehouse in Senec, Slovakia, ready for fast dispatch.
Spectrum selects its raw materials carefully and uses modern production lines that let it colour filaments while keeping their key mechanical properties. Every spool comes with an individual quality report from Spectrum's own Verify Your Spool system. The range is split into three segments: easy-to-use desktop materials, industrial-grade engineering thermoplastics, and high-performance compositions for professional users.
Spectrum filaments at JustCreate3D
- PLA – PLA MATT, PLA SILK, PLA Glow in the Dark, PLA Carbon and GreenyHT™, a PLA with higher heat resistance.
- PETG and PCTG – PETG Premium, PETG MATT, PET-G Glitter, PETG Glow in the Dark, PETG HT100™, PETG FX120™, PETG 10% PTFE, PETG Carbon and PCTG.
- ASA and ABS – ASA 275, ASA Kevlar, ASA-X CF10™, ABS Kevlar and ABS Medical.
- Engineering materials – PA6 Low Warp™, PA6 Low Warp CF15S, PA6 Low Warp GF30™, PA6 CS20 FR V0, PC-PTFE and PPS AM230™.
- 5PACK sets (5 × 0.25 kg) – ASA 275, Carbon Set, Material Mix 1 and 2, PCTG Premium and PLA SILK, handy for testing several materials or colours.
Who is Spectrum for?
Spectrum is a good choice for beginners who want reliable PLA and PETG in many colours, and for advanced users who need technical materials such as low-warp nylon, ASA for outdoor parts or PPS. The 5PACK sets are a practical way to try a new material before buying a full spool.
Frequently asked questions
What is the Verify Your Spool report?
It is Spectrum's own quality system: each spool has an individual report with its quality data, so you can check the batch you received.
Which Spectrum filament should I start with?
Start with PLA (MATT or SILK for a nicer surface) or PETG Premium for tougher parts. For outdoor use, ASA 275 is the usual next step.
Do Spectrum composites need a hardened nozzle?
Yes. Carbon, glass fibre and Kevlar filled materials are abrasive, so use a hardened steel nozzle with them.
Browse all Spectrum filaments in stock.