Platinum LCD Series - General Purpose | FormFutura
ormfutura's Platinum LCD Series is a high-quality photopolymer resin specifically designed for use with open source LCD and DLP 3D printers operating within a wavelength range of 385 - 420nm. This resin is notable for its low odor, fast printing speed, and excellent accuracy, resulting in smooth, detailed prints with vibrant, long-lasting colors. In addition, it offers good UV and weather resistance, low water absorption, and low shrinkage, making it suitable for a variety of applications including figurines, models, and functional prototypes. With a viscosity of 500 cps at 25°C and a density of 1.18 g/cm2, the Platinum LCD Series is an effective choice for producing high-quality 3D printed parts.
Platinum LCD Series - General Purpose | FormFutura
ormfutura's Platinum LCD Series is a high-quality photopolymer resin specifically designed for use with open source LCD and DLP 3D printers operating within a wavelength range of 385 - 420nm. This resin is notable for its low odor, fast printing speed, and excellent accuracy, resulting in smooth, detailed prints with vibrant, long-lasting colors. In addition, it offers good UV and weather resistance, low water absorption, and low shrinkage, making it suitable for a variety of applications including figurines, models, and functional prototypes. With a viscosity of 500 cps at 25°C and a density of 1.18 g/cm2, the Platinum LCD Series is an effective choice for producing high-quality 3D printed parts.
Preparation(s) before starting to print
- Shake the bottle for at least 2 minutes before each use.
- After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
- The resin can be poured back from the vat into the bottle once your print is finished
- Always use protective measurements like safety glasses and nitrile gloves when handling resins.
Post-processing
- We do advise you to post-process your 3D print in order to achieve the material properties
- Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
- An ultrasonic cleaner is preferred/recommended
- Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
- Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
- Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
- The preferred curing wavelength is between 300-410nm
